ENGINE

• Model: Iveco Tector 
• Type: Four stroke, common rail injection, turbocharged intercooled diesel (Euro3)
• Configuration: 6 - In line
• Bore / Stroke: 102 / 120 mm.
• Displacement: 5 900 cm3
• Power (EEC): 202kW (275 HP) @ 2 500 rpm.
• Torque (EEC): 930Nm (686lbs/ft) @ 1 250rpm.
• Governor: Electronic engine management (All speed)
• Cooling: Water-cooled with Viscostatic Fan.
• Lubrication: Double replaceable cartridge filters and oil to water heat exchanger.
• Intake: Slim line stack pipe through round section horizontally mounted dry element air cleaner.

DIMENSIONS (mm) & MASSES (kg)

• WHEELBASE: 6 210mm
• Overall chassis length: 10 697mm
• Front overhang: 2 252mm
• Rear overhang: 2 235mm
• Chassis frame width: 855 mm
• Chassis height: 1 080 mm
• Front Track width : 1 985 mm
• Rear Track width: 1 820mm
• Minimum ground clearance (axle 2): 232
• Turning Circle (kerb to kerb): 17 700 mm

CLUTCH

• Type: Hydraulic, single dry plate, pull type with diaphragm springs.
• Outer Diameter: 380 mm (15”)

TRANSMISSION

• Model: Iveco 2895-9
• Type: 9 - Speed synchromesh gearbox
• Ratio 1st / Final: 13.56 / 1:1

FRONT AXLE

• Model: Iveco 5871/5
• Type: Rigid, drop forged, 1 beam
• Capacity: 7 500kg

REAR AXLE

• Model: Meritor MS13-165
• Type: Single reduction
• Capacity: 11 600 kg
• Ratio: 3.91:1

STEERING

• Model: ZF 8098
• Type: Power assisted recirculating ball

SUSPENSION

• Front: Multileaf, single acting leaf springs with anti-roll bar and double acting shock absorbers.
• Rear: Multileaf, double acting leaf springs with anti-roll bar and double acting shock absorbers plus helper springs.

BRAKES

• Type: Disc front, and rear brakes conforming to SABS and EEC regulations
• Service: Full air system with 2 independent circuits, ABS, single cylinder 360 cm2 compressor, air dryer pressure regulating valve and 2X15 litre air tanks.
• Size - Front: Ventilated discs 432 mm dia 816 cm2 friction area.
• Size - Rear: Ventilated discs 432 mm dia 816 cm2 friction area.
• Emergency Parking: Combined with park brake.
• Parking: Spring brake cylinders on rear axles.
• Auxiliary: Exhaust brake with three separate operating modes.

WHEELS

• Rims: 10 Stud, Single piece 9.0” x 22.5”
• Tyres: Tubeless radial ply
• Front: (2) 315 x 80 R22.5
• Rear: (4) 315 x 80 R22.5

CHASSIS

• Type: 233 x 7.7mm x 80mm one piece “C” section longitudinals. Front and rear tow cross members bolted to the frame.
• Capacity: 18 000kg

FUEL SYSTEM

• Tank: 280 Litre plastic tank mounted
• Filtration: The vehicle is fitted with 3 separate fuel filters: the Main Filter mounted on the engine,a Pre Filter with a hand primer fitted on the chassis and a Racor fuel filter/water separator with a see-thru bowl

ELECTRICAL SYSTEM

• Type: 24 Volt, negative earth
• Batteries: 2 x 143 Ah
• Starter motor: 4Kw
• Alternator: 28V – 70 A
• Other: Full vehicle and engine warning system by gauges and lights. All lights conform to SABS requirements.

MISCELLANEOUS EQUIPMENT

• Spare wheel and carrier
• Jack and wheel spanner
• Warning triangle
• Daily tachographs (EEC)
• 110kph Speed limiter